VISION Telescopic Projector Bracket - TM-TELE

TM-TELE TELESCOPIC PROJECTOR CEILING MOUNT\n\nUniversal projector ceiling mount with telescopic pole\n\nOverall length 440-735 mm\n\nFull adjustment: tilt at top for sloping ceilings / pitch and roll at the bottom\n\nThe TM-TELE Techmount is a projector ceiling bracket for anchoring any data projector safely to a ceiling. The telescopic design allows fast deployment and adjustment without the need cut and drill the pole. It has a greater range than most other telescopic mounts and the pole can be removed for œflush-mounting the projector as close to the ceiling as possible. Note: unlike the TM-1200 the length of this bracket cannot be extended.\n\nOne-Man Installation Thoughtful design detail include a length adjustment clamp system which requires only one hand.\n\nSloping Ceilings A tilting mechanism is included which tilts to a full 90 degrees, allowing you to use the bracket as a boom if need be.\n\nSafety Approved A back-up fall-arrest tether is included which secures the projector to your bracket, and the pole has a mechanical stop so that the two parts of the pole cannot be separated. Vision recommends a maximum safe working load of 10kg which is well within the limits of the product and meets the BSi installation standard specification (PAS122:2009).\n\nEasy fit Projectors have threaded inserts in the bottom for attachment - but not all use the same diameter screws so Vision includes a selection to suit most projectors. Simply locate the œspider arms on our bracket over the attachment holes, and insert a screw into the projector.\n\nObstruction-free Cable Management Vision™s unique ˜chute-through™ system leaves cable access clear - even for big VGA connectors.\n\nTools Included A spanner and pin-hex key are included. Vision also includes a hex-key bit for a power drill to speed up installation.\n\nSecure Quick-release mechanisms make life easier for thieves, so the TM-TELE is secure and features security bolts.\n\nSpecifications BOX DIMENSIONS: 393 x 150 x 80 mm PACKAGED WEIGHT: 3 kg SAFE WORKING LOAD: 10kg COLOUR: Satin White ACCESSORIES INCLUDED: 1 x H50 Pin-Hex key 1 x 17mm Spanner 4 x M3 43mm screws 4 x M4 43mm screws 4 x M5 43mm screws 4 x M6 43mm screws 4 x M2.5 43mm pan slot 4 x M8 50mm Ceiling Fixtures with raw plugs 1 x Safety Tether 1 x Ceiling Trim Disc WARRANTY: 2-year return to base\n\n.
Best price: VISION Telescopic Projector Bracket - TM-TELE
Merchant:
Category merchant: Projector Mounts

from AVPartsMaster

Brand : Vision