VISION Techconnect 15m Cable Pack - TC3-PK15MCABLES

For 99% of professional AV installations the same set of modules are required, so Vision offer a simple package that contains a basic selection of modules as a starting point. Just select the length of the cable package you need to go with it from:\n\n3m (9 ft)\n\n5m (16 ft)\n\n10m (33 ft)\n\n15m (49)\n\nTechconnect3\n\nTechconnect is a modular audio-visual faceplate family engineered especially for AV installers.\n\nA œsurround which comes in two parts fits to a backbox (or œmudring if your wall is hollow), then the modules fix in place to complete the installation. Techconnect is based around standard UK backbox sizes, and Vision also offers mounting hardware for other countries.\n\nImproved Fit and Finish Techconnect3 has more space behind the modules stash cables, and narrower and more even gaps between modules.\n\nMatt White Pure white with a chiselled profile, Techconnect3 also has 11 mm of flat space above and below the connectors for information or company branding stickers.\n\nStronger Techconnect3 has shorter modules and extra ribbing to reduce module flex. On parts where flex is desirable to avoid shattering ABS plastic is used.\n\nScrew-In Modules The modules have a tab that hooks into the surround at the bottom, then a couple of turns of the pre-installed screws locks the modules into place\n\nPassive and Active Modules Vision offer pass-through modules for AV, IT, and pro-audio applications, and active modules which boost USB or extend HDMI, VGA, and USB signals over CAT6 cable. You can even install a powerful audio amplifier module or a universal controller module right next to the connectivity modules. The faceplate is close at hand and securely fastened in place.\n\nPlug-In Cables Vision offer professional cables. VGA, Phono (RCA), and Minijack Techconnect cables have phoenix connectors on one end which plugs right in to the rear of the modules. These phoenix connectors can easily be removed to pull cables.\n\nEDID Support Vision™s VGA cable included the SDA and SCL data lines to support EDID handshakes which allows the display device to communicate its supported display modes.\n\nNo Soldering Faceplates that require soldering take time build onsite, and - even for experts - create a possible point of failure in the system. Techconnect de-risks an installation.\n\n3-Year Warranty You can™t afford issues, and neither can we. Vision is totally focused on offering reliable products.\n\nCable Package Contents\n\n1 x VGA\n\nWhite, Ferrite core to stop RF interference. A moulded connector on one end, and a male phoenix connector on the other end which can be plugged directly into the rear of module. Gold-plated male to male HD15 (15 pin) connector. Sheath PVC, outer diameter: 8.0 mm, Conductor thickness: 28AWG, Drain wire laid between aluminum mylar and braid, Al-Mg alloy wire overall, >65% coverage braided shield. Impedance: at 10MHz, 75 (coaxial cable), Resistance 20 (/1000m) 237.25.\n\n1 x 3.5mm Minijack\n\nHigh-grade white installation cable. A moulded connector on one end, and a male phoenix connector on the other end which can be plugged directly into the rear of a Techconnect faceplate module.\n\n1 x HDMI\n\nWhite, 4K compliant, High-Speed (Category 2) with Ethernet, HDMI 1.4, Gold-plated HDMI-A connectors, Sheath: outer diameter: 9.5mm, Conductor thickness: 5 m 28 AWG (American Wire Gauge) / 10 m 26 AWG / 15 m 24 AWG. Sheath outer diameter: 5 m 7.3 mm (16.4 ft 0.29) / 10 m 8.0 mm (32.81 ft 0.31) / 15 m 9.5 mm (49.21 ft 0.37).\n\nPACKAGE DETAILS:\n\nCARTON DIMENSIONS: 3/5m Cable Package: 200 x 200 x 90mm (7.87 x 7.87 x 3.54) 10m Cable Package: 220 x 220 x 120mm (8.66 x 8.66 x 4.72) 15m Cable Package: 250 x 250 x 140mm (9.8 x 9.8 x 5.51)\n\nPACKAGED WEIGHT: 3m Cable Package: 1.0kg / 2.2lb 5m Cable Package: 1.35kg / 2.97lb 10m Cable Package: 2.2kg / 4.85lb 15m Cable Package: 3.73kg / 8.22lb\n\nCABLES COMPLIANCES: RoHS, WEEE, CE/EMC, FCC\n\n.
Best price: VISION Techconnect 15m Cable Pack - TC3-PK15MCABLES
Merchant:
Category merchant: Mounting Solutions Installation Essentials Cable kits

from AVPartsMaster

Brand : Vision