VISION 1.2m Projector Ceiling Bracket - TM-1200

Vision TM-1200 is a universal projector ceiling mounting bracket designed to fit 99% of all small to medium sized data projectors safety and sturdily to a ceiling. The Vision TM-1200 can be quickly assembly into a number of different configurations, including flush mount where the projector is as close to the ceiling as possible.\n\nThe TM-1200 projector mount pole has greater rigidity than a telescopic mount and it can be cut it to length on site so it has an infinitely variable length. A 1m male-to-female projector mount extension pole is available which can be daisy-chained. Order Code: TM-1200 EXT1M\n\nSloping Ceilings? No Problem!\n\nThe Vision TM-1200 projector mounting solution comes with a tilting mechanism which tilts the projector to a full 90 degrees, allowing you to use the bracket as a projector boom arm if need be.\n\nSafety Approved\n\nIn line with best practice the Vision Techmount TM-1200 projector mount comes with a safety fall-arrest tether which can be used to secure the projector to the bracket. Independent testing on calibrated test equipment measured a breaking-strain of half a ton! Vision recommend a maximum safe working load of 10kg which is well within the limits of the TM-1200 Projector mounting solution.\n\nEasy fit\n\nFitting the Vision TM-1200 universal projector spider bracket to the projector is simple, most projectors have threaded inserts in the bottom of the projector for attaching to a projector bracket or mount . Not all projectors use the same diameter screws so Vision provide a selection to suit almost all projectors. Simply adjust the arms on our universal projector mounting spider bracket over the mounting holes of the projector, and insert a screw into the projector base.\n\nObstruction-free Cable Management\n\nRather than having a bolt that runs through the pipe, restricting cable access. The Vision TM1200 projector mounting bracket uses a unique quad-bolt ˜chute-through™ system which leaves cable access clear to prevent snagging.\n\nTools Included\n\nThe Vision TM1200 projector mount bracket comes completes with a spanner and pin-hex keys. The only tool you™ll need is a hacksaw or 2 pipe cutter (ask your tool supplier for a cutter with a 6-67mm range, and a metal file). Vision have also included with the projector mount pole a drilling jig so that you can easily and accurately drill 9mm holes into the projector pole.\n\nQuick-release mechanisms make life easier for thieves, so the Vision Techmount TM-1200 projector mount features pin-hex key security bolts.\n\nFinish the job properly!\n\nEnhance aesthetics with the retro-fit trim disk which can be installed after the projector is mounted to the ceiling, ideal for false-ceiling environments and through plasterboard ceilings to properly finish off the projector installation.\n\nBOX DIMENSIONS: 1300 x 160 x 90mm\n\nPACKAGED WEIGHT: 6kg\n\nSAFE WORKING LOAD: 10kg\n\nCOLOUR: Satin White\n\nACCESSORIES INCLUDED:\n\n1 x H50 Pin-Hex key\n\n1 x 17mm Spanner\n\n4 x M3 43mm screws\n\n4 x M4 43mm screws\n\n4 x M5 43mm screws\n\n4 x M6 43mm screws\n\n4 x M2.5 43mm pan slot for Optoma & Acer\n\n4 x M8 50mm Ceiling Fixtures with rawl plugs\n\n1 x Drilling Jig\n\n1 x Safety Tether\n\n1 x Ceiling Trim Disc\n\n.
Best price: VISION 1.2m Projector Ceiling Bracket - TM-1200
Merchant:
Category merchant: Mounting Solutions Installation Essentials Projector brackets

from AVPartsMaster

Brand : Vision